Heating Wet Zones Without the Headache
Trying to heat a locker room or a changing area with standard convection heaters is a losing battle. They spend forever trying to warm up the air, and the humidity usually ends up frying the electronics anyway. That’s why we go with IP65 shortwave infrared heaters. Instead of fighting the air, these just beam heat directly onto people and surfaces. It’s a different way of thinking about warmth. Why it actually works Shortwave infrared is fast. Like, “feel it the second you step under it” fast. In a drafty room where the heat usually just floats away, this gives you immediate relief without having to wait for the whole room to warm up. We pack these into a sealed IP65 enclosure. In plain English? It means the housing is totally dust-tight and can handle being blasted by water jets during a deep clean without shorting out. The nitty-gritty on the gear Inside, we’re using quartz glass tubes with a halogen fill to get that bright, intense heat. To make sure moisture doesn’t sneak into the wiring, we use heavy-duty gaskets to seal everything tight. But here’s the thing: you’ve got to watch your power. A high-density setup feels like a luxury spa, but it’ll hammer your breakers. If you’re going for high wattage, make sure your wiring is thick enough to handle the load, or you’ll run into voltage drops. Getting them installed (and keeping them running) These are designed to just drop right into your existing wall or ceiling mounts. Since they’re IP65, you can hose down the room without stressing about the internals. A couple of warnings, though. Those quartz tubes get incredibly hot—hot enough to burn someone. You absolutely need physical guards so nobody accidentally touches the element. And a pro tip: keep the reflectors clean. If dust builds up on the mirror, you lose about 20% of your heat throw. A quick wipe-down makes a huge difference.